AXIS C1310-E Mk II Network Horn Speaker
System on chip (SoC)
Model i.MX 8M Nano
Memory 1024 MB RAM, 1024 MB Flash
Audio hardware
Enclosure Re-entrant horn loudspeaker with compression driver
Max sound
pressure level
>121 dB
Frequency
response
280 Hz - 12.5 kHz
Coverage pattern 70° horizontal by 100° vertical (at 2 kHz)
Audio
input/output
Built-in microphone (can be disabled mechanically)
Built-in speaker
Built-in
microphone
specification
50 Hz - 12 kHz
Digital signal
processing
Built-in and pre-configured
Amplifier
description
Built-in 7 W Class D amplifier
Audio management
AXIS Audio
Manager Edge
Built in:
– Content management for music and live/pre-recorded
announcements.
– Scheduling to decide when and where to play specific content.
– Content prioritization to ensure urgent messages interrupt
the schedule.
– Zone management allowing you to divide up to 200 speakers
into 20 zones.
– Health monitoring for remote discovery of system errors.
– User management to control who has access to what features.
See separate datasheet for more details.
AXIS Audio
Manager Pro
For larger and more advanced systems. Sold separately. See
separate datasheet for specifications.
AXIS Audio
Manager Center
AXIS Audio Manager Center is a cloud service for remote access
and management of multi-site systems.
Audio software
Audio streaming One-way/two-way with optional half-duplex echo cancellation.
Mono.
Audio encoding AAC LC 8/16/32/48 kHz, G.711 PCM 8 kHz, G.726 ADPCM 8 kHz,
Axis µ-law 16 kHz, WAV,
MP3 in mono/stereo from 64 kbps to 320 kbps.
Constant and variable bit rate.
Sampling rate from 8 kHz up to 48 kHz.
Network
Network
protocols
IPv4, IPv6 USGv6, ICMPv4/ICMPv6, HTTP, HTTPSa, HTTP/2, TLSa,
QoS Layer 3 DiffServ, FTP, SFTP, CIFS/SMB, SMTP, mDNS (Bonjour),UPnP®
, SNMP v1/v2c/v3 (MIB-II), DNS/DNSv6, DDNS, NTP, NTS,
RTSP, RTP, SRTP/RTSPS, TCP, UDP, IGMPv1/v2/v3, RTCP, ICMP,
DHCPv4/v6, ARP, SSH, LLDP, CDP, MQTT v3.1.1, Secure syslog
(RFC 3164/5424, UDP/TCP/TLS), Link-Local address (ZeroConf),
IEEE 802.1X (EAP-TLS), IEEE 802.1AR
System integration
Application
Programming
Interface
Open API for software integration, including VAPIX®, metadata
and AXIS Camera Application Platform (ACAP); specifications at
axis.com/developer-community. ACAP includes Native SDK.
One-click cloud connection
Support for Session Initiation Protocol (SIP) for integration with
Voice over IP (VoIP) systems, peer to peer or integrated with
SIP/PBX.
Video
management
systems
Compatible with AXIS Companion, AXIS Camera Station, video
management software from Axis’ Application Development
Partners available at axis.com/vms
Intelligent audio Auto Speaker Test
Event conditions Audio: audio clip playing, speaker test result
Device status: IP address blocked/removed, live stream active,
network lost, new IP address, system ready
Edge storage: recording ongoing, storage disruption, storage
health issues detected
I/O: digital input, manual trigger, virtual input
MQTT: subscribe
Scheduled and recurring: schedule
Event actions Audio: run automatic speaker test
Audio clips: play, stop
I/O: toggle I/O
Light and siren: run, stop
MQTT: publish
Notification: HTTP, HTTPS, TCP and email
Recordings: record audio
SNMP trap messages: send message
Status LED: flash
Built-in
installation aids
Test tone verification and identification
Functional
monitoring
Auto Speaker Test, Connection verification, Built-in system
logging
Approvals
Product markings CSA, UL/cUL, UKCA, CE, KC, EAC, VCCI, RCM
Supply chain TAA compliant
EMC EN 55035, EN 55032 Class B, EN 50121-4, EN 61000-6-1,
EN 61000-6-2
Australia/New Zealand: RCM AS/NZS CISPR 32 Class B
Canada: ICES-3(B)/NMB-3(B)
Japan: VCCI Class B
Korea: KS C 9835, KS C 9832 Class B
USA: FCC Part 15 Subpart B Class B
Railway: IEC 62236-4
Safety CAN/CSA C22.2 No. 62368-1 ed. 3, IEC/EN/UL 62368-1 ed. 3
Environment IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-14,
IEC 60068-2-27, IEC 60068-2-78, IEC/EN 60529 IP66,
NEMA 250 Type 4X, MIL-STD-810G 509.5, MIL-STD-810H 509.7
Cybersecurity ETSI EN 303 645
Cybersecurity
Edge security Software: Signed firmware, brute force delay protection, digest
authentication, password protection
Hardware: Axis Edge Vault cybersecurity platform
Secure element (CC EAL 6+), Axis device ID, secure keystore,
secure boot
Network security IEEE 802.1X (EAP-TLS)a, IEEE 802.1AE (MACsec PSK/EAP-TLS),
IEEE 802.1AR, HTTPS/HSTSa, TLS v1.2/v1.3a, Network Time
Security (NTS), X.509 Certificate PKI, host-based firewall
Documentation AXIS OS Hardening Guide
Axis Vulnerability Management Policy
Axis Security Development Model
AXIS OS Software Bill of Material (SBOM)
To download documents, go to axis.com/support/cybersecurity/resources
To read more about Axis cybersecurity support, go to
axis.com/cybersecurity
General
Casing IP66- and NEMA 4X-rated
Aluminum back can and stainless steel bracket
Color: white RAL 9010
Power Power over Ethernet (PoE) IEEE 802.3af/802.3at Type 1 Class 3
Typical 2 W, max 12.95 W
Connectors Network: RJ45 10BASE-T/100BASE-TX PoE
I/O: 4-pin 2.5 mm terminal block for 2x supervised configurable
I/Os
Reliability Designed for 24/7 operation.
Operating
conditions
Temperature: -40 °C to 60 °C (-40 °F to 140 °F)
Humidity: 10-100% RH (condensing)
Storage
conditions
Temperature: -40 °C to 65 °C (-40 °F to 149 °F)
Humidity: 5–95% RH (non-condensing)
Dimensions For the overall product dimensions, see the dimension drawing
in this datasheet.
Weight 1.3 kg (2.9 lb.)