如何恢复安讯士AXIS摄像机出厂设置 -AXIS Q1635
如何恢复安讯士AXIS摄像机出厂设置 -AXIS Q1635
To reset the product to the factory default settings:
1. Disconnect power from the product.
2. Press and hold the control button and reconnect power
3. Keep the control button pressed for 15–30 seconds until the status LED indicator flashes amber
把电源/POE断开，然后按住那个按键，再接上POE供电，直到灯闪烁之后松开按键.
- 上一篇：安讯士摄像机故障排除-检查硬件和连接 2018/5/8
- 下一篇：监控摄像机镜头焦距与实际照射距离的关系 2018/5/3