你的位置:首页 > 技术支持 > 常见问题

安讯士球机如何恢复出厂设置-AXIS Q6034-E PTZ 球机

2018-06-13 11:38:01      点击:

安讯士球机如何恢复出厂设置-AXIS Q6034-E PTZ 球机

把电源保护开关(4)按钮按住,然后再按住控制(7)按钮,加电启动,直到球机自检.

Reset to Factory Default Settings
This will reset all parameters, including the IP address, to the factory default settings:
1. Press and hold the Control button and the Power button for about 15 seconds until the Status indicator flashes amber (see
as below picture)
2. Release the Control button but continue to hold down the Power button for about 1 minute until the Status indicator
turns green.
3. Release the Power button and re-assemble the product.
4. The process is now complete, the product has been reset to the factory default settings. The default IP address is
192.168.0.90